LV-N series
Small size and highly flexible installation
Regardless of your target distance, you can easily adjust the beam spot to meet your application needs.
The LV-NH32 Series offers a detection range of 1200 mm, which is 30 times greater than any conventional KEYENCE model. This results in greater flexibility when choosing the installation position of the sensor. There is no longer any need to use complicated fixtures or worry about where to locate sensors.
The focal distance of the spot can be freely adjusted according to the application.
By using semiconductor laser as a light source, it allows the LV series to form a sharp beam spot even at a long distance. Even when mounted far away from the target, the LV series can accurately detect and differentiate that which would have been impossible with a sensor using a LED as a light source.
KEYENCE LV-NH32 series
The focus can be adjusted for a desired distance, allowing for flexible sensor mounting.
KEYENCE LV Series
A sensor can not be mounted near the press because it will interfere with the manual positioning of parts. The LV's long distance detection is accurate and does not obstruct the operation.
KEYENCE LV-NH32 series
With the long detecting distance and adjustable beam spot diameter, the LV-NH32 eliminates the need for changeover adjustment even when the diameter of a wafer changes.
KEYENCE LV Series
By using a laser as a light source, the The LV-NH32's offers a bright beam spot, allowing for easy setting.
Model |
LV-NH35 |
LV-NH32 |
LV-NH37 |
|||
Type |
Straight-beam coaxial |
Adjustable beam spot |
Ultra-small beam spot |
|||
FDA (CDRH) Part 1040.10 |
Class 1 Laser Product |
|||||
IEC 60825-1 |
||||||
Light source |
Visible red semiconductor laser, Wavelength: 660 nm |
|||||
Detecting |
MEGA |
750 mm |
1200 mm |
70±15 mm |
||
ULTRA |
600 mm |
1000 mm |
||||
SUPER |
450 mm |
750 mm |
||||
TURBO |
300 mm |
500 mm |
||||
FINE |
150 mm |
250 mm |
||||
HSP |
100 mm |
200 mm |
||||
Environmental resistance |
Ambient temperature |
-10 to +55 °C (No freezing) |
||||
Relative humidity |
35 to 85 % RH (No condensation) |
|||||
Material |
Case |
Glass reinforced plastic |
||||
Lens cover |
Norbornene plastic |
Acrylic (Receivers: Polyarylate) |
Glass (Receivers: Polyarylate) |
|||
Weight |
Approx. 65 g |
Downloads
For Your Support