Specs Colour LCD Monitor CA-M series

Multi-touch enabled 12 " touch panel/12 " LCD colour monitor





Display panel

No. of dots

1,024 (W) x 768 (H) dots or 800 (W) x 600 (H) dots

Active display area

245 (W) x 184 (H) mm


Panel-mount type Front face is IP65 rated when panel mounted


Operation life

Approx 100,000 hours (When installed in an upright position under 25 °C)


Input signal

Analog RGB signal (0.7 Vp-p, 75 Ω) , Horizontal/vertical synchronization signal

Input signal mode

1,024 (W) x 768 (H) , Vertical frequency: 60 Hz or
800 (W) x 600 (H) , Vertical frequency: 60 Hz


High-intensity D-sub 15-pin female (3-way, inch screw)

Touch panel connector

D-sub 9-pin male (2-way, inch screw) *3


Console connector

Connector for RJ45 use


Power voltage

24 VDC ±10 %

Current consumption

1 A max.

Environmental resistance

Ambient temperature

0 to +40 °C

Relative humidity

85% RH or less


Approx. 2.3 kg

*1 Options for CA-MP120(T) Monitor mounting stand: OP-87262, Pole-mounting bracket: OP-42279
*2 Options for CA-MP120T
For XG-X/XG-7000/CV-X400:OP-87264 (Touch panel modular RS-232C cable 3 m) , OP-87265 (Touch panel modular RS-232C cable 10 m)
For XG-8000: OP-87258 (Touch panel RS-232C cable 3 m) , OP-87259 (Touch panel RS-232C cable 10 m)
Screen protector: OP-87263
Handheld Console junction cable: OP-87260 (Handheld console junction cable 3 m) , OP-87261 (Handheld console junction cable 10 m)
*3 Use a junction cable if the handheld console is inserted into the slot at the console connector.
Console connector does not support XG-X Series USB consoles.

Back to top





24 VDC Power supply

Input conditions

Rated input voltage

85 to 264 VAC , 47 to 63Hz , 110 to 370 VDC*1


82% (100 VAC)/85% (200 VAC)typ. (with 100% load)

Rated input current

2.2 A or less (100 VAC)/1.1 A or less (200 VAC)

Output conditions

Rated output voltage

24 VDC

Rated output current



Overvoltage protection

Constant current voltage limiting. Automatic reset 7.9 A min.

Activates at 26.4 V or more. Voltage interruption method,
recovers when input is applied again.*2

Applicable standards

Safety standards

UL : UL508、UL60950-1
C-UL : CSA C22.2 No.14-M95, CSA C22.2 No.60950-1-03
EN : EN62368-1、EN50178
IEC : IEC62368-1

EMC standard

FCC Part15B Class A, EN55011 Class A, EN61000-6-2

Limits for harmonic current emissions


Environmental resistance

Ambient temperature

-10 to +55 °C (No freezing)

Storage temperature

-20 to +70 °C (No freezing)

Relative humidity

85% RH or less (no condensation)


Approx 700 g

*1 The rated input voltage and rated frequency when applying for safety standards are 100 to 240 VAC, 50/60 Hz.
*2 To recover, turn off the input power supply, leave it off for 1 minute or more, and then turn it on again.

Back to top