To use all available functions on this website, JavaScript must be enabled in your browser.
View More
Products
Industry
All
Automotive Metals Semiconductors/LCDs Electronic Devices Plastics Films/Sheets Food/Pharmaceutical Medical Technology Logistics
81 results
When the code is marked on a flux-treated PCB, the reflection from the light causes glare, which used to require installation of external lighting. The SR-2000 is equipped with automatic polarisation so that glare can be removed using the main unit only, eliminating the need to install external lighting.
Electronic Devices
Previously, readability of code markings could not be adequately checked, resulting in random reading errors during post-processing. The SR-2000's built-in code verification function allows readability to be checked immediately after marking, preventing reading errors during post-processing.
Previously, when there were multiple feeds of PCBs with one 2D code printed on each board, code readers needed to be moved along a cylinder mechanism. The SR-2000's wide field of view makes it possible to read everything at once, without the need for a cylinder mechanism.
The higher magnification provides a clearer look at the electrode portion of the capacitor on the PCB. Measure not only the vertical, horizontal, and height dimensions of capacitors but also the electrode dimensions simultaneously.
The LM Series is capable of 0.1 μm repeatability, enabling “placeand- press measurement” even for microscopic parts.
Up to 300 points can be measured simultaneously without the need for positioning. The illumination conditions are also reproduced automatically, making it possible to perform measurements with no variations between users.
The LM Series is equipped with an auto-focus function. The LM Series enables high-precision measurement even for parts with height differences by capturing focused images at each height.
Accurate measurement is possible even for complex pressed parts by using lighting equipment suited to the measurement location.
Measurement of sharp-tipped points such as a needle is possible with the LM Series. Stable measurement of the outer diameter of the cylinder is also possible with no light wraparound thanks to parallel transmitted light.
