1. Home
  2. Products
  3. Controls
  4. PLC(Building-block/ Modular/ High Speed type)
  5. Programmable Controller
  6. Models
  7. Expansion Output Unit 16-output Transistor (Sink) connector type

Programmable ControllerKV-8000 series

Expansion Output Unit 16-output Transistor (Sink) connector type

KV-NC16ET

SPECIFICATIONS

Select Language

Model

KV-NC16ET

Expansion output unit

External connectionmethod

MOSFET output (With overcurrent protection function)*1*2

External connection method

Connector

Rated load

30 VDC, 0.2 A*3

Leakage current (when output is OFF)

100 µA or less

Residual voltage (at ON)

0.6 VDC or less

ON resistance

Minimum applicable load

Common method

16 points/1 common (2 terminals)*4*5

Response time

OFF to ON

100 µs or less (with a load of 1 mA or more)

ON to OFF

200 µs or less (with a load of 1 mA or more)

Relay life

Relay replacement

Internal current consumption

30 mA or less

Weight

Approx. 100 g

*1 If even a single overcurrent is detected, the protection operation (output turned OFF) and automatic recovery are repeated for all outputs within the shared common (The outputs within the shared common that are protected when an overcurrent is detected are outputs 000 to 007 or 008 to 015 for the KV-NC16ET(P) and KV-NC16ET(P)E.), until the cause of the problem is removed.
*2 Sink output types use MOSFET (N-ch) output. Source output types use MOSFET (P-ch) output.
*3 The rated load of each common terminal is 1.6.
*4 The KV-NC16ET(P), KV-NC16ET(P)E, and KV-NC32ET(P) COM terminals are shorted internally.
*5 The outputs within the shared common that are protected when an overcurrent is detected are outputs 000to 007 or 008 to 015 for the KV-NC16ET(P) and KV-NC16ET(P)E.

  • PLC/HMI User Support
  • General Catalogue Request
  • Trade Shows and Exhibitions
  • eNews Subscribe

Controls